Udev trigger freezing?

Help
1

I’m trying to support my Ledger Nano S on NixOS by adding these udev rules to my configuration. I’ve tried the following:

one

# ledger-udev-rules.nix
{ pkgs, ... }:

pkgs.stdenv.mkDerivation rec {
  pname = "ledger-udev-rules";
  version = "0.0.1";

  udevRules = pkgs.writeText "20-hw1.rules" ''
    # HW.1 / Nano
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2581", ATTRS{idProduct}=="1b7c|2b7c|3b7c|4b7c", TAG+="uaccess", TAG+="udev-acl"
    # Blue
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000|0000|0001|0002|0003|0004|0005|0006|0007|0008|0009|000a|000b|000c|000d|000e|000f|0010|0011|0012|0013|0014|0015|0016|0017|0018|0019|001a|001b|001c|001d|001e|001f", TAG+="uaccess", TAG+="udev-acl"
    # Nano S
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001|1000|1001|1002|1003|1004|1005|1006|1007|1008|1009|100a|100b|100c|100d|100e|100f|1010|1011|1012|1013|1014|1015|1016|1017|1018|1019|101a|101b|101c|101d|101e|101f", TAG+="uaccess", TAG+="udev-acl"
    # Aramis
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0002|2000|2001|2002|2003|2004|2005|2006|2007|2008|2009|200a|200b|200c|200d|200e|200f|2010|2011|2012|2013|2014|2015|2016|2017|2018|2019|201a|201b|201c|201d|201e|201f", TAG+="uaccess", TAG+="udev-acl"
    # HW2
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0003|3000|3001|3002|3003|3004|3005|3006|3007|3008|3009|300a|300b|300c|300d|300e|300f|3010|3011|3012|3013|3014|3015|3016|3017|3018|3019|301a|301b|301c|301d|301e|301f", TAG+="uaccess", TAG+="udev-acl"
    # Nano X
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004|4000|4001|4002|4003|4004|4005|4006|4007|4008|4009|400a|400b|400c|400d|400e|400f|4010|4011|4012|4013|4014|4015|4016|4017|4018|4019|401a|401b|401c|401d|401e|401f", TAG+="uaccess", TAG+="udev-acl"
    # Ledger Test
    SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0005|5000|5001|5002|5003|5004|5005|5006|5007|5008|5009|500a|500b|500c|500d|500e|500f|5010|5011|5012|5013|5014|5015|5016|5017|5018|5019|501a|501b|501c|501d|501e|501f", TAG+="uaccess", TAG+="udev-acl"
  '';

  dontUnpack = true;

  installPhase = ''
    install -Dm 644 "${udevRules}" "$out/lib/udev/rules.d/20-hw1.rules"
  '';
}

# configuration.nix
services.udev.packages = [ pkgs.ledger-udev-rules ];

two

# configuration.nix
services.udev.extraRules = ''
  # HW.1 / Nano
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2581", ATTRS{idProduct}=="1b7c|2b7c|3b7c|4b7c", TAG+="uaccess", TAG+="udev-acl"
  # Blue
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000|0000|0001|0002|0003|0004|0005|0006|0007|0008|0009|000a|000b|000c|000d|000e|000f|0010|0011|0012|0013|0014|0015|0016|0017|0018|0019|001a|001b|001c|001d|001e|001f", TAG+="uaccess", TAG+="udev-acl"
  # Nano S
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001|1000|1001|1002|1003|1004|1005|1006|1007|1008|1009|100a|100b|100c|100d|100e|100f|1010|1011|1012|1013|1014|1015|1016|1017|1018|1019|101a|101b|101c|101d|101e|101f", TAG+="uaccess", TAG+="udev-acl"
  # Aramis
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0002|2000|2001|2002|2003|2004|2005|2006|2007|2008|2009|200a|200b|200c|200d|200e|200f|2010|2011|2012|2013|2014|2015|2016|2017|2018|2019|201a|201b|201c|201d|201e|201f", TAG+="uaccess", TAG+="udev-acl"
  # HW2
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0003|3000|3001|3002|3003|3004|3005|3006|3007|3008|3009|300a|300b|300c|300d|300e|300f|3010|3011|3012|3013|3014|3015|3016|3017|3018|3019|301a|301b|301c|301d|301e|301f", TAG+="uaccess", TAG+="udev-acl"
  # Nano X
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004|4000|4001|4002|4003|4004|4005|4006|4007|4008|4009|400a|400b|400c|400d|400e|400f|4010|4011|4012|4013|4014|4015|4016|4017|4018|4019|401a|401b|401c|401d|401e|401f", TAG+="uaccess", TAG+="udev-acl"
  # Ledger Test
  SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0005|5000|5001|5002|5003|5004|5005|5006|5007|5008|5009|500a|500b|500c|500d|500e|500f|5010|5011|5012|5013|5014|5015|5016|5017|5018|5019|501a|501b|501c|501d|501e|501f", TAG+="uaccess", TAG+="udev-acl"
'';

When I rebuild my system only option two “works” (i.e. when I plug the device in dmesg --follow logs the device details). Option one doesn’t work and worse when I run udevadm trigger, my machine freezes.

Any idea why my machine would freeze from option one? It’s my understanding according to the Ledger install script that option one is more aligned with their installation.